EVGA Z77 FTW Guide de l'utilisateur télécharger pdf (Page 15)

EVGA Z77 FTW Motherboard

Securing the Motherboard into a System Case

Most system cases have a base with mounting studs or spacers to allow the

motherboard to be secured to the chassis and help to prevent short circuits. If

there are studs that do not align with a mounting hole on the motherboard, it is

recommended that you remove that stud to prevent the possibility of a short

circuit. In most cases, it is recommended to secure the motherboard using a

minimum of nine (9) spacers and screws.

1. Carefully place the motherboard onto the stand offs located inside the chassis.

2. Align the mounting holes with the stand offs.

3. Align the connectors to the I/O shield.

4. Ensure that the fan assembly is aligned with the chassis vents according to the fan

assembly instruction.

5. Secure the motherboard with a recommended minimum of nine (9) screws.

Connecting Cables

This section takes you through all the necessary connections on the

motherboard. This will include:

 Power Connections

24-pin ATX power (ATX_PWR_24)

8-pin ATX 12V power (ATX_PWR_SP1 & ATX_PWR_SP)

 Internal Headers

Front Panel Header

IEEE 1394a Header

USB Headers

Audio Header

 SATA II

 SATA III

 Chassis Fans

 USB 2.0

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Pas de commentaire

EVGA Z77 FTW Guide de l'utilisateur Page 15